Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateTrusted Garage Door Installation for Pico Rivera Homeowners
A new garage door installation in Pico Rivera typically runs between $700 and $2,200 for a standard residential door, and the work is measured first so the price on your written estimate is the price you approve before anything gets ordered. Most Pico Rivera homes we see were built between the 1950s and 1970s, which means a lot of the doors we replace are original wood or early steel models that have warped, rusted along the bottom panel, or simply outlived their hardware. Joe Dawson leads our installation crew, and he will tell you plainly whether your door needs replacing or whether a Sherwood Garage Door Repair technician can keep it running. Call (866) 618-5424 and we will walk you through the options.
Garage Door Replacement
Garage Door Replacement is the removal of your existing door, track, and hardware, followed by the installation of a new door that fits the same opening. You need it when the door is beyond panel repair, the track is bent or misaligned beyond alignment, or you are tired of throwing money at springs and rollers on a door that fights you every time it cycles. Sherwood Garage Door Repair handles the full replacement, from disconnecting and removing the old door to setting the new panels, springs, cables, rollers, and track as one system. A typical replacement in Pico Rivera runs $700 to $2,200 depending on door size, material, insulation, window inserts, and how much old hardware can be reused. The written estimate locks the final number before any work begins.
Panel-by-Panel Removal and Reset
We take the old door out in sections so the new one goes in square and balanced. The track and brackets are inspected before the new door goes up, because a new door on worn brackets will never run smooth.
Matched Springs and Cables
The springs on a replacement door must match its weight, not the old door’s. We size the springs and cables to the new door so the opener does not have to fight an unbalanced load from day one.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Garage Door Installation Service
Garage Door Installation Service covers the labor, hardware, and setup needed to put a new door on a garage that never had one or to upgrade an existing door opening to a different size. You might need it after a garage conversion, a structural repair, or when you want a taller door for a pickup or SUV with a roof rack. We handle residential installation of premium door brands including Clopay, Amarr, Wayne Dalton, and Raynor, and our team works with single and double doors, standard and low-headroom track, and both torsion and extension spring setups. For Pico Rivera homes, expect $700 to $2,200 as the typical range for New Door Installation, with the final figure set by the written estimate after we measure the opening.
Low-Headroom and Odd Openings
Older Pico Rivera garages often have less clearance above the opening than modern doors assume. We use low-headroom track and side-mount configurations where needed so the door still opens fully without hitting the ceiling or the opener.
Opener-Compatible Setup
We install the door so your existing opener or a new one mounts cleanly without bracket grinding or force adjustments. The door weight, balance, and travel are set to the opener’s limits, not the other way around.
Commercial Garage Door Installation
Commercial Garage Door Installation is the installation of sectional, rolling steel, or high-cycle doors on warehouses, shops, truck bays, and other business properties in the Pico Rivera area. You need it when a commercial door has failed structurally, when a tenant improvement changes the opening, or when a new building goes up and needs a door that can handle daily cycles. Sherwood Garage Door Repair handles commercial projects with the same team that does our residential work, so you get one point of accountability for the whole job. Commercial door pricing runs $700 to $2,200 for smaller sectional work, though larger rolling doors and high-lift track runs are quoted per job after measurement. Every commercial estimate is written and approved before we order anything.
High-Cycle Hardware
Commercial doors get cycled more in one month than a home door sees in a year. We size springs, rollers, and hinges for the cycle count the door will actually carry, not the light-duty parts a big-box door comes with.
Bay Doors and High-Lift Track
For truck bays and shops with taller ceilings, we run high-lift track that keeps the door tight to the ceiling and out of the way of forklifts and racking. The lift geometry changes the spring sizing, and we get that right the first visit.
Garage Door Installation Contractors
Garage Door Installation Contractors are the people you hire to safely remove an old door and put in a new one, including the heavy lifting, spring tensioning, and track alignment that are genuinely dangerous to do yourself. You need one when your door is damaged, when you are building new, or when a handyman quote leaves out permits, spring work, or opener integration and you want the job done to code. Our installation crew works under Joe Dawson’s supervision, and we are brand-trained on eight major garage door and opener manufacturers: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. We do not subcontract your job to a third crew. A typical installation runs $700 to $2,200 in Pico Rivera; the written estimate sets the exact figure.
One Team, One Scope
The people who measure your opening are the same people who order the door and install it. That single-company accountability means the buck stops with us, not with a salesman passing your job to someone you have never met.
Brand-Trained, Not Brand-Locked
We work on what you already have. If a Craftsman door has a broken panel, we can match it or replace the door; we will not push you into a different brand because it is convenient for our inventory.
Garage Door Seal Installation
Garage Door Seal Installation is the replacement of the rubber or vinyl weatherstrip along the bottom of the door and the side and top jambs. You need it when you can see daylight under the closed door, when rainwater puddles inside the garage during the winter storms that move through Pico Rivera, or when dirt and leaves collect in the back corners. Sherwood Garage Door Repair replaces bottom seals, threshold seals, and jamb seals on most makes, including Raynor and Clopay doors, and we cut the seal to length on site rather than stretching a universal piece that pulls back at the ends. Expect seal work to run $120 to $240 for a standard single door, quoted and approved before we cut anything.
Bottom Seal and Retainer
Most bottom seals slide into an aluminum retainer that gets bent and corroded over time. We check the retainer first; if it is too far gone, we replace it with the seal so the new piece does not flop loose in six months.
Side and Top Jambs
Gaps along the sides let dust and heat in and conditioned air out. We match the existing jamb profile and fasten it with the right clips so the door still closes tight without dragging.
New Garage Door Installation
New Garage Door Installation is what most Pico Rivera homeowners mean when they call about replacing a tired or damaged door: order the right door, tear out the old system, and set the new one so it operates quietly and safely. You need it when the old door is bent, the panels are rusted through, or you want a quieter, better-insulated door that actually closes flush. Sherwood Garage Door Repair installs residential doors from Clopay, Amarr, Wayne Dalton, and Raynor, plus openers from LiftMaster, Chamberlain, and Genie, and we size the springs and cables to the new door’s actual weight. In Pico Rivera, a New Door Installation typically runs $700 to $2,200 depending on material, insulation, windows, and size, with the written estimate setting the final price.
Insulated and Quiet Doors
A steel door with a polyurethane core runs quieter and keeps garage temperatures more stable than an uninsulated single-layer door. That matters in Pico Rivera summers when attached garages bake in the afternoon sun and heat the rooms above them.
Opener and Door as One System
We install the door and opener together, so the travel limits, force settings, and balance all match. A new door on an old opener works, but a matched setup lasts longer and needs fewer trips back out.
Brands We Service
We service LiftMaster openers across the residential line, including belt-drive and chain-drive models, and the smart-home-integrated myQ units that Pico Rivera homeowners use to check their door from a phone. We know the force-sensing and travel-limit quirks on these units, so we do not waste your time testing parts that are not the problem.
We service Chamberlain and Craftsman doors and openers regularly, including the older Craftsman units that are still running fine but need a replacement gear or logic board. We also install residential doors from Raynor, and our team is factory-familiar with their panel profiles and spring weights. Whether you have Raynor, LiftMaster, Chamberlain, Craftsman, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The door is off its track. A derailed section can fall as you try to force it back. Get clear of the opening and call us; we reset the rollers and check the track so the door stays put.
- The door only opens partway and stops. That usually means a spring has lost tension or the opener’s force settings are maxed out, which points to a balance problem. Running it anyway wears the opener motor fast.
- You can hear the springs or cables straining. Frayed cables and stretched springs are under extreme tension. A snapped cable can whip and a failed spring will drop the door hard.
- Light shows under the closed door. A failed bottom seal wastes energy and lets rodents in, and it often means the door is not closing square. The same misalignment that causes the gap also grinds the track over time.
- The opener runs but the door stays. That usually means the emergency release is pulled or the coupler is worn, but running the motor against a frozen door burns it out. We diagnose it in one visit.
Our Process, Step by Step
- 1
Measure and assess. We come out, measure the opening, headroom, and side clearance, and check the existing track, springs, and opener. You get a written estimate with the door options and the price before you agree to anything.
- 2
Order the right door. We order the door to your opening size and your spec, including insulation, window placement, and panel profile. No guesswork on a truck-stock door that almost fits.
- 3
Safe removal. We disconnect the opener, secure the door, and release the spring tension with the proper tools. The old door comes out in sections, and we haul away the debris.
- 4
Install and balance. The new track, brackets, panels, springs, cables, and rollers go in as one system. We wind the springs to match the door’s weight and set the travel so the door rests flush and opens level.
- 5
Test and hand off. We cycle the door a full open-close-open, watch the balance, check the opener’s limits and force settings, and show you how the emergency release and safety sensors work before we leave.
How Much Does Garage Door Installation Cost in Pico Rivera?
A typical new garage door installation in Pico Rivera runs $700 to $2,200 for a standard residential door. The big variables are door size (single versus double), material (single-layer steel versus insulated steel or composite), window inserts, and whether the old track and opener can be reused. A basic single door on an existing opener sits at the lower end of that range, and a double insulated door with windows and a new opener lands higher.
What affects the price the most is the door itself: panel material, insulation, and finish. Labor is the second factor, and anything unusual, like a low-headroom opening or a garage converted to a room, adds time. To avoid overpaying, get a written estimate that itemizes the door, hardware, and labor separately, and be wary of quotes that bundle the opener without saying which model you are getting. Your free estimate from us includes the measurement, the door recommendation, and a line-item price. Call (866) 618-5424 and we will put it in writing before you commit to anything.
Our Service Area Near Pico Rivera
We work throughout Pico Rivera and the surrounding communities, including Temple City, Baldwin Park, Montebello, Bell Gardens, and Huntington Park. Fast dispatch from 7am to 7pm, Sunday through Friday, puts us at your garage quickly when a door fails or you are ready to schedule an installation. We answer 24/7, so call (866) 618-5424 any time and we will get you on the schedule.
Serving Pico Rivera, CA – Our Local Coverage Area
We serve Pico Rivera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Garage Door Installation in Pico Rivera
Garage door installation is the process of measuring your opening, ordering the correct door, removing the old door and hardware, and installing the new panels, track, springs, cables, and rollers as a balanced system. It includes hauling away the old door and testing the new one with your opener. We handle the full installation from start to finish.
A standard residential installation takes most of a day from removal to final test. The door is ordered to your opening size after we measure it, so scheduling depends on the manufacturer’s lead time. We will give you a clear timeline when you get your written estimate. Call (866) 618-5424 to schedule a free measure.
A typical garage door installation in Pico Rivera runs $700 to $2,200 depending on door size, material, insulation, and whether you are also replacing the opener. The written estimate sets the final price before any work starts. Call (866) 618-5424 for a free, no-obligation quote.
Yes, we service and install LiftMaster and Chamberlain openers, including smart-home-integrated myQ models and older Chamberlain units. We are brand-trained on these systems, so we know their travel and force configurations. We also work on Genie and Craftsman openers.
Same-day installation is not realistic for a new door because the door has to be ordered to your opening size after we measure it. What we can do same day is assess the door, give you a written estimate, and schedule the install. Call (866) 618-5424 and we will get you measured. We answer 24/7, and crews dispatch from 7am to 7pm, Sunday through Friday.
The warranty terms depend on the manufacturer and the door model. We will walk you through the warranty coverage during your estimate so you know what is covered and for how long before you sign anything. We stand behind our workmanship too.
Clear the area inside the garage about six feet back from the door and remove anything leaning against the walls on either side. Move vehicles out of the driveway and garage before we arrive. We will handle the rest, including shutting off power to the opener and hauling away the old door.
Schedule Your Garage Door Installation Service in Pico Rivera Today
Ready for a door that opens every time, closes flush, and does not wake the whole street? Call (866) 618-5424 today for a free, no-obligation estimate. We answer 24/7, and the price is quoted and agreed before any work starts. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by Joe Dawson, Owner at Sherwood Garage Door Repair, serving Pico Rivera since 2011.